Installing a home EV charger in Australia typically costs between $1,500 and $3,500 including the charger unit and installation. The charger itself ranges from $800 to $2,200 depending on the brand and features, with installation labour and wiring adding $700 to $1,500. A switchboard upgrade may be required if your board lacks capacity.
Overview
With EV sales surging across Australia, home and workplace charging infrastructure is in high demand. A dedicated EV charger (Level 2 / AC wallbox) charges your vehicle 5 to 10 times faster than a standard power point and is the safest, most efficient way to charge at home. Installation must be performed by a licensed electrician who can assess your switchboard capacity, run dedicated cabling, and ensure the charger is correctly wired with appropriate circuit protection. Popular charger brands in Australia include Tesla Wall Connector, Zappi, Wallbox Pulsar, ABB, and OCPP-compatible units for commercial sites.
When you need this service
- ✓You've purchased or ordered an electric vehicle and want to charge at home
- ✓Your workplace or commercial premises needs EV charging for staff or customers
- ✓You want to upgrade from slow trickle charging (standard power point) to a dedicated wallbox
- ✓Your strata building or apartment complex is considering shared EV charging infrastructure
- ✓You want a smart charger that integrates with your solar system for solar-powered charging
How it works
- 1
Site Inspection & Load Assessment
The electrician inspects your switchboard, assesses available capacity, determines the optimal charger location, and measures cable run distances.
- 2
Charger Selection & Quote
Based on your vehicle, driving habits, and electrical setup, the electrician recommends a suitable charger and provides a fixed-price quote covering unit, cabling, and installation.
- 3
Installation
A dedicated circuit is run from your switchboard to the charger location. The charger is mounted, wired, and configured. A switchboard upgrade is performed if required.
- 4
Testing & Handover
The charger is tested with your vehicle, the app is set up if applicable, and you're shown how to schedule charging for off-peak rates. A compliance certificate is issued.
How much does it cost?
Home EV charger installation in Australia typically costs $1,500 to $3,500 all-inclusive. The charger unit itself costs $800 to $2,200 — budget options like the Zappi or Wallbox Pulsar Plus sit around $1,000 to $1,400, while the Tesla Wall Connector is approximately $1,100 to $1,500. Installation costs depend heavily on the distance between your switchboard and the charger location: a short cable run (under 10 metres) is the cheapest, while longer runs or runs through difficult access areas can add $500 to $1,000. If your switchboard needs upgrading to handle the additional load, expect an extra $1,200 to $2,500.
Australian regulations
EV charger installation in Australia must comply with AS/NZS 3000 (Wiring Rules) and be performed by a licensed electrician. The dedicated circuit must include an appropriately rated circuit breaker and RCD protection. Some energy distributors require notification for chargers above 3.6 kW (single-phase) or 11 kW (three-phase). Chargers must carry appropriate Australian certifications (RCM mark). For strata properties, installation typically requires body corporate approval under state strata legislation.